Decontamination showers

Decontamination showers EDK are designed for usage in field conditions, when preliminary cleaning and staff decontamination in  protective equipment must be ensured including auxiliary material. Rapid set-up and activation of equipment needed is ensured to provide a good functioning of the system. The whole system of inflatable showers is of a quality inflation tubular construction, consisting of floor and a shower cabin; the floor is used as a catch tank for waste water. A single-chamber tube construction is equipped with an inflation/discharge valve and a safety valve which protects the tubes from over inflation. The compressor or pressurized air bottles are used to inflate the construction.

Technical data:                          

  • 5 nozzle spray system and 1 hand nozzle for inaccessible areas
  • flow capacity: 0,8 – 1,1 l/min due to the pressure (each nozzle)
  • spray system is connected through the Siroflex coupling fast joint  (C type joint can be delivered if needed)
  • the GEKA coupling is used to connect the system to waste water cycle
  • an anchoring system through the ropes or floor boards

Dimension:                       

  • outside: 2 000 x 2 000 x 2 400 mm (l x w x h)                
  • inside: 1 600 x 1 540 x 2 170 mm (l x w x h)              
  • folded and packed: 900 x 900 x 400 mm (l x w x h)              

Weight:

  • 30 kg                      

Inflation time:

  • 60 sec 

Decontamination shower: EDK-06

Dimension:                         

  • outside: 2 500 x 2 500 x 2 700 mm (l x w x h)          
  • inside: 2 040 x 2 040 x 2 470 mm (l x w x h)            
  • folded and packed: 1 100 x 700 x 500 mm (l x w x h) 

Weight:

  • 40 kg                        

Inflation time:

  • 60 sec

Decontamination shower: EDK-08

The shower is designed primarily for decontamination of immobile patients on stretchers but also can be used for other large items.

Dimension: 

  • outside: 3 000 x 1 900 x 2 450 mm (l x w x h) 
  • inside: 2 600 x 1 500 x 2 250 mm (l x w x h) 
  • folded and packed: 1 400 x 900 x 350 mm (l x w x h) 

Weight:

  • 60 kg

Inflation time:

  • 90 sec

ADVANTAGES

  •  rapid assembly (from transportation to serviceable stage)
  •  high mobility
  •  sufficient amount of decontamination nozzles and rinsing shower heads
  •  self-supporting inflatable tube construction, no other supporting components are needed (e.g. struts, etc)
  •  safety valves, ensuring the tube construction is not overinflated
  •  wide range of different sizes  
  •  can be transported by usual transport means