Cleanrooms

Partition panel basic

PARTITION PANEL basic

The basic partition panels represent one of the basic elements for the construction of cleanrooms and workplaces with maximum safety, sterility, hygiene, simple maintenance, and sanitation. Due to their design they are mainly suitable for hospitals, pharmaceutical, electrical, engineering, foodstuff, and chemical industry premises.

In the premises established by the partition panels overpressure or urderpressure maintaining is guaranteed due to their tight connection between the panels, floor, and ceiling, which fact meets the basic criteria for cleanrooms for which these panels have been specially designed and verified in practical operation.

THE PANELS

  • Sandwich type, consisting of external coat and optional material fill
  • Connected by mutual slipping over, self-supporting
  • Full or glazed by indoor pharma-glazing

( the glazing, see Cat. No. 103)

  • Above-the-door panel
  • At-the-door panel
  • Installation panel for the media distribution lead, as a standard, from the floor or from above soffit. Installation column, width 200÷400 mm
  • May be completed with bushings for electric feeders
  • May be provided with HVAC grilles

All shapes and designs of the basic partition panels meet parameters required for explosive environment

ADVANTAGES OF THE PARTITION PANELS

  • quick installation and dismantling to enable flexible space layout change
  • simple maintenance
  • long-lasting appearance
  • anti-corrosion protection
  • thermal and sound insulation

*** Panels with a different width are to be made as untypical, max. panel width 1190mm

** For higher walls, the panels are assembled as for height to reach required dimension

* Panel thickness with the Styrofoam IB fill will be increased by 2 mm

FIXING THE PANEL TO THE FLOOR

  • Fixing of the panel to the floor slipping over profiles
  • Either the “Basic” or the „U“-type profiles
  • Panel fixed, above soffit, to the construction ceiling or auxiliary structure
  • according to space layout requirements and interacting with other components of an implemented building, by means of the „U“- type profile

MAINTENANCE AND CLEANING

To be cleaned by non-abrasive disinfecting cleaning agents, or by slightly abrasive disifecting cleaning agents (applicable only for the ground/matt surfaces, only in the grinding direction) based on butyl alcohol (stains, fingerprints); based on acids where heavier pollution occurs (mineral sediments, corrosion due to HCl).

Concentration to be chosen in relation to the pollution extent.