When the demand for new cutting-edge devices that can meet the daily needs of rescue meet the talent of Spencer, we can expect a real prodigy of industrial design. Cross Chair is the ideal device to assist those rescue professionals who in their daily activities wish to experience a really new solution that improves emergency road rescue and transport with the emergency vehicle. Cross Chair can be used as a stretcher or as a transport chair as it adapts to a wide range of operational scenarios.
Two essential devices rolled into one big project. The rescue teams will be able to choose, according to the type of operational procedure required, to have a manageable stretcher for the patient's or in alternative a practical transport chair and without the inconvenience of having to overburden the sanitary compartment of the emergency vehicle. For added versatility and safety, a purpose made trolley is available. The Cross stretcher is supplied with two model STX 702 restraint straps and mattress.
Cross Chair offers an extraordinary versatility without comparison. The adjustment mechanism allows instant adaption of the device to the requirements of the intervention. The change of configuration takes only two seconds. The stretcher / transport chair is designed for use with the dedicated trolley. This option further expands the possibilities of use of the product, ensuring handling and stability without any compromise.
CHAIR MODE | Size |
Height (mm) | 1430 |
Width (mm) | 600 |
Depth with all handles closed (mm) | 1000 |
Depth with all handles opened (mm) | 136S |
STRETCHER MODE | Size |
Length with handles closed (mm) | 1970 |
Length with handles opened (mm) | 2235 |
Width (mm) | 600 |
Lying part height (from floor) (mm) | 250 |
GENERAL | |
Weight (kg) | 26 |
Sidebars length (mm) | 600 |
Sidebars height (mm) | 200 |
Loading capacity1 (kg) | 250 |
1 Maximum load capacity means the total weight distributed according to the human anatomy. In determining the total load of the weight on the product, the operator must consider the weight of the patient, the equipment and the accessories.
In international rescue scenes the spine board has become an essential element. Carrera Pro is ready to welcome the spine board into the space under the loading surface of the stretcher. Fixation is practical and is achieved when pressure is applied.
Tthe new Carrera, a wholesome and solid stretcher, able to rewrite the parameters of excellence for its category. No one before has ever given such care and attention to technological innovation and exploitation of space. No other cot has a design as harmonious and no other cot is able to contain a spinal board. Two versions, tall and short, designed, developed and constructed entirely in Europe to satisfy all the needs of those who in the rescue field, are used to high standards. The Carrera stretcher is supplied with two straps model STX 702. There is an innovative suspension system in the newly designed posterior legs, able to reduce vibrations and noises caused by uneven ground, before they are transmitted to the patient. Consequently, it is possible to achieve larger stability, more precise steering and smooth transportation, even on rough ground. The system is not an expensive optional feature, but a standard for the whole range. The loading level adjustment has been upgraded and also set as a standard feature on all Carreras, so that you can adapt them to any kind of ambulance. Simplicity and constructive perfection have achieved new and significant levels.
Spencer's range has never been so ample. It is possible to choose several models: Tec, Activ and Pro. Each model has its own character, style and performance. The initial approach to the Carrera family starts with the very light weight, epoxy powder varnished Tec. Carrera Activ combines lightness and the possibility of shortening the length. The extreme expression of integral rescue is represented in the Pro version that can contain a spine board. Every model, characterised by excellent stability and exclusive self effect is available in two different heights, different configurations of the loading platform and the exclusive Twist system. The force of a project is its ability to originally produce a wider range of variants.
The construction technique originates from an experience that has allowed us to substitute the rivets with highly resistant welding. Every part of the frame is individually tested and the trolley's compound release levers are extremely simple and reliable. The design is extremely simple and consequently not weighed down by unnecessary details. Its originality and genius lies in the great resistance, achieved also by avoiding any architectural fantasy. With regards to the adjustment of the loading level height, the Ella Self provides an easy and immediate solution, again on the right track to solve any problem in this respect. At the beginning of the 90s along with Ella Self, the concept of polychromes as an indispensable instrument in the ambulance stretcher was established. Because rescue operators are technicians and professionals, but also people who aware of what is around them. Available in a varnished blue, and hand polished steel. The extremely contained cost, the safety in use reducing accidents to the operator, the higher rapidity of use make it an indispensable instrument for any medical company. The Ella Self stretcher is supplied with two straps model STX 592.
Particularly appreciated overseas where the semi-automatic stretcher is used as a primary and secondary transport device. The Enduro enters the Spencer range and opens the way to a new and better method of approaching rescue. The robust structure, welding of the frame, stability combined with excellent manoeuvrability, make this stretcher extremely trustworthy and long-lasting. The Enduro stretcher is supplied with two straps model STX 702.
The new Alto is a completely new concept, conceived by Spencer, in the realm of equipment for use in transport and transfer of patients between hospitals. It has been developed to meet with the ever increasing demand for a stretcher that can automatically raise the patient up to one metre in height. This system combines an excellent level of comfort for the patient with the reduction of effort for the operator. It is simple in its substance but presents a balanced relationship between comfort and cost.
The intelligent lifting system for raising patients to a height of one metre is the fruit of an advanced project, that has established new standards of the X-frame stretcher in terms of agility and reduction of effort. The system continually verifies the stability, adapting itself to the height needed: the “flexible” distribution of the two axles allows the wheels to achieve a maximum traction and to make the most of the thrust. Therefore, the stretcher always offers an optimal stability and superb gear dynamics. The comfort and the ergonomics of the stretcher have been raised and this allows for a reduction in the effort required, to an increase in safety and therefore improved performance of the operators.
Durability is guaranteed by the stainless steel, welded framework with aluminium and polycarbonate inserts. The polished finish and easy access to all parts permits an efficient maintenance and sanitization of the stretcher. By optimizing the position of the controls and the centre of gravity, it has been possible to obtain an absolute control and dominance of the stretcher. But we are not dealing only with a sensation: despite the natural tendency to lean sideways, predictable when the patient's platform is raised relatively high, Alto has a notable steering capacity and minimum risk of lateral pitching. This has been obtained thanks to the combination of the calibration of the springs, the wheel tracking and the pace, from the specific mixture of wheels that have a greatly reduced drift, and from the Twist system that provides the possibility to vary the interlocking depending on the conditions in which the stretcher has to be steered. The Alto stretcher is supplied with two straps model STX 702.
It is designed to limit forward, backward and sideways movement of trolleys inside special vehicles and, also, thanks to guides, help to install stretchers.
Complete with 12 screws, 12 bolts and 12 gaskets.
It is designed to limit the movement of trolleys forward, backward and sideways and, thanks to guides, help to install stretchers.
The retainer consists of two elements: the base, fixed to the loading platform, and the mobile part, that directly fixed to the gurney.
The R-MAX lock is used in ambulance and aircraftы.
The R-MAX fixation has three fixation points and can withstand a load of 10 G.
Removable universal tool table necessary for personnel while transporting the patient on a gurney.
Pole for intravenous infusion TRACK 4 is attached to a gurney along with the capacity for fluids.
Pole fpr intravenous infusions TRACK 5 is attached to a gurney along with the capacity for fluids.
QMX 750 is a one-piece mattress for SPENSER stretchers.
QMX 750 is resistant to adverse weather conditions, easy to clean and disinfect.
The mattress can be used both for transportation and for carrying patients due to the use of handles at the base of the mattress.
QMX 776 is a one-piece mattress for SPENSER stretchers.
QMX 750 is resistant to adverse weather conditions, easy to clean and disinfect.
An universal locking system allows it to be used on most SPENSER stretchers and trolleys.
QMX 777 - one-section mattress for SPENSER wheelers. The mattress is resistant to extreme weather conditions, easy to clean and disinfect.
There are special loops at the base of the mattress for fixation on the stretcher.
An universal locking system allows it to be used on most SPENSER stretchers and trolleys.
QMX 700 is a two-section mattress for SPENSER stretchers.
The mattress is divided into two sections.
The length of the head section is ¾ of the length of the mattress for the convenience of the patient.
It comes with two locking straps to the stretcher.
The mattress is resistant to unfavorable weather conditions, easy to clean and disinfect.
QMX 710 is a mattress with one longitudinal section and 4 inner sections for stretchers.
The mattress is resistant to extreme weather conditions, easy to clean and disinfect.
The ergonomic pillow for stretchers supports the neck and head in the correct position.
It is designed to reduce the risk of secondary infections when the patient is transported on a stretcher.
The pillow is waterproof, easy to clean and disinfect.
It is designed to reduce the risk of secondary infections when the patient is transported on a stretcher.
The pillow is waterproof, easy to clean and disinfect.
It is designed to fix and hold the oxygen cylinder of 2L capacity on a stretcher.
It is designed to fix the TANKER cylinder holder to the stretcher.
It is equipped with two screws and three clips (pre-installed).
It is intended for transportation of an oxygen cylinder along with the patient on a stretcher. The compartment for the cylinder has a soft, porous structure to provide protection.
There is a pocket for storing accessories and instructions on the front side of the bag. The bag has an opening for the oxygen hose, which makes it easier to carry out an oxygen therapy.
It is intended for transportation of an oxygen cylinder along with the patient on a stretcher. The compartment for the cylinder has a soft, porous structure to provide protection.
The bag has an opening for the oxygen hose, which makes it easier to carry out an oxygen therapy.
Telescopic headrest for transporting the patient on a stretcher. Easy to clean and disinfect.
The belt is designed for easy, quick, and safe fixation of patients during transportation.
Ability to adjust the length of the belt allows you to use it to fix both adults and children. The belt is compatible with all models of stretchers.
The belt is designed for easy, quick, and safe fixation of patients during transportation. Adjustable length of the belt allows you to use it to fix both adults and children. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
The belt is designed for easy, quick and safe fixation of patients during transportation. The belt is compatible with all Spencer’s stretchers.
Strap DNA STRAP is retractable and used to fix the patient on a stretcher., The belt is easy to remove thanks to the tension mechanism. This belt allows you to automatically fix the patient and do not disturb him during transportation.
It is used to fix the patient on a stretcher. The belt is easy to remove thanks to the tension mechanism. This belt allows you to automatically fix the patient and do not disturb him during transportation.
This system has the purpose of fixing children on a stretcher during transportation. The system is made of easily washable materials and is compatible with all Spencer stretchers.
The system consists of a base and straps for fixation.