Size: А А А Interval: AB AB AB Colors: А А А А Images: Включить графику Выключить графику
Regular versionRegular version
Go to top

Medical beds

Patient bed with pneumatic gas spring adjustable position

Patient bed with pneumatic gas spring adjustable position

Fixed-height hospital bed and surface manoeuvring with two retractable cranks. All steel components are epoxy-coated with anti-microbial additive.

BASE FRAME

Welded steel tubing frame construction provides maximum stability. Four feet of the bed made in powder-coated steel dim. 60x1.5 mm. Frame includes fittings for receiving feet or castors.

FRAME

Made in steel containing compartments for polyfunctional devices and panel insertion at head/foot of bed.

BED SURFACE

Four surface sections are made of an articulated outer frame in steel with technopolymer slats containing ventilation holes and mattress rim. Surfaces are easy to clean and extract to facilitate sanification. Manual back section regulation using retractable crank. Internal section welded to the surface with closure cover. Sections construction avoids abdominal crushing by creating an angle of 71° between back and seat when back section is raised. Pelvic section regulation using same system as back regulation. Foot section regulated with Rastomat click mechanisms or gas spring devices allowing for millimetric regulations (optional). Medical Device Class I; conforms to Directive 2007/47/EC of the European Parliament and of the Council; construction in accordance with the UNI CEI EN 60601-2-52:2010 Standards.

  • Classification 2007/47/EC Medical Device Class I
  • Conformity:    UNI CEI EN 60601-2-52:2010
  • Surface dimensions:  2008x880 mm
  • Overall dimensions:  2230x920 mm
  • Floor height:   500 mm
  • Castors diam. 125 mm
  • FEATURES
  • Back regulation:  70°
  • Pelvic regulation:  0° - 36°
  • Foot regulation:  0° - 16°
  • Safe working load:  250 kg
  • Bed weight (without accessories):65 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Patient bed with electrical height regulation

Patient bed with electrical height regulation

Electrical height regulating bed Twin, is a medical device bed developed according to UNI CEI EN 60601-2-52:2010 standards, conceived for use in speciality wards and intensive therapy. Twin aids nurse staff in caring for the patient and contributes towards better quality of care and recovery.

Twin offers a series of important characteristics and optional accessories to meet all requirements for a universal hospital bed. Simultaneously, the variety of configurations is also in harmony in any environmental setting.

Each component was studied and constructed to facilitate cleaning and sanification procedures. In particular, all metal components are epoxy coated in white NCS S 1002 – B with anti-microbial additive. The mattress surface is made in steel and allows for polyfunctional device and accessory insertion.

The Twin bed offers several advantages and best technological solutions developed from the company’s multi-sector know how, aiming towards improvement of patient safety and facilitating operator’s work.

Variable electrical column height regulation to guarantee stability at all heights, even during patient transportation, allowing for greater loads. Bed frame made in ABS thermoframe with 4 removable sections.

The sliding back and pelvic sections is obtained by use of actuators while foot section is manoeuvred with a Rastomat device. Bed includes CPR handles and tank holder.

Surface section with 3 joints and 4 sections in extractable technopolymer with raised edges for mattress containment.

Automatic back and pelvic 9 cm slide sections when operated to avoid abdominal pressure.

The panels at each end of the bed are easily extractable and allow nurse staff fast access to patients head when necessary.

No strain, easy panel removal in complete safety aids work of nursing staff.

Dimensions (125 mm castors)

  • Maximum floor height - 850 mm
  • Minimum floor height - 450 mm
  • Bed length with bumpers - 2230 mm
  • Bed width with Technopolymer lifted side rails - 1000 mm
  • Bed width with collapsed side rails - 980 mm
  • Surface dimensions - 2008x880 mm

Technical Data

  • Autocontour Trendelenburg/Reverse - 19°
  • Back regulation - 70°
  • Pelvic regulation - from 0 to 36°
  • Foot regulation - from 0 to 16°
  • Back translation - 90 mm
  • Maximum lift capacity - 250 kg
  • Safe working load - 230 kg
  • Electrical Data
  • Power supply - 220V – 50 Hz
  • IEC protection class - I / B
  • Voltage - 24 Vcc
  • Electric efficiency - 1,5 A
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Patient bed with fixed height

Patient bed with fixed height

Fixed-height hospital bed and surface manoeuvring with two retractable cranks. All steel components are epoxy-coated with anti-microbial additive.

BASE FRAME

Welded steel tubing frame construction provides maximum stability. Four feet of the bed made in powder-coated steel dim. 60x1.5 mm. Frame includes fittings for receiving feet or castors.

FRAME

Made in steel containing compartments for polyfunctional devices and panel insertion at head/foot of bed.

Four surface sections are made of an articulated outer frame in steel with technopolymer slats containing ventilation holes and mattress rim. Surfaces are easy to clean and extract to facilitate sanification. Manual back section regulation using retractable crank. Internal section welded to the surface with closure cover. Sections construction avoids abdominal crushing by creating an angle of 71° between back and seat when back section is raised. Pelvic section regulation using same system as back regulation. Foot section regulated with Rastomat click mechanisms or gas spring devices allowing for millimetric regulations (optional). Medical Device Class I; conforms to Directive 2007/47/EC of the European Parliament and of the Council; construction in accordance with the UNI CEI EN 60601-2-52:2010 Standards.

 

  • Classification 2007/47/EC Medical Device Class I
  • Conformity:    UNI CEI EN 60601-2-52:2010
  • Surface dimensions:  2008x880 mm
  • Overall dimensions:  2230x920 mm
  • Floor height:   500 mm
  • Castors diam. 125 mm
  • FEATURES
  • Back regulation:  70°
  • Pelvic regulation:  0° - 36°
  • Foot regulation:  0° - 16°
  • Safe working load:  250 kg
  • Bed weight (without accessories): 65 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru
Contact Us

Write answer 2 + 2 =

By clicking the "Send request" button, you consent to the processing of your personal data. Privacy Policy
Thansk!

Your message has been sent.

We will contact You.