Go to top

Monitor 506N3 VitalCare

Монитор пациента 506N3 Серия VitalCare

VitalCareTM 506N3 series

Designed to travel everywhere you do, the VitalCareTM 506N3 series patient monitor with integrated carry-handle attaches quickly and easily to a rolling stand. Available in multiple configurations – with choice of Criticare or Nellcor oximetry – the 506N3 patient monitors provide maximum versatility and cost-effectiveness. New smart battery management allows up to 100 NIBP measurements on a single charging. With a compact design that is easily setup for spotcheck or continuous monitoring, the 506N3 patient monitor adapts readily to hospital, clinic and transport requirements.

Features and Benefits

  • Proprietary ComfortCuff ™ NIBP measures on inflation for faster, more comfortable readings.
  • Choice of Criticare DOX™ digital SpO2 technology or Nellcor OxiMax™ SpO2 technology.
  • Audible and visual alarms are adjustable providing instant notification the way you need them.
  • Optional FILAC FasTemp™ predictive temperature for quick, accurate measurements.
  • Optional internal printer for on-demand, automatic interval, trends or multi-patient reports.

Non-Invasive Blood Pressure

  • Technique: Oscillometric measure upon inflation
  • Measurement Time: <40 seconds typical; 0 to 300mmHg;
  • standard adult cuff
  • Automatic Measurement
  • Cycles: 1 - 60 minute; 2 - 4 hour; STAT
  • Inflation Pressure Range: 30 to 300mmHg (Adult)
  • 30 to 150mmHg (Pediatric)
  • 20 to 150mmHg (Neonate)
  • Resolution: 1mmHg
  • Clinical Accuracy: SP-10:2002
  • Transducer Accuracy: ±2mmHg or ±2% of reading, whichever is
  • greater, over full range
  • STAT mode: 5 minutes of consecutive readings

Pulse Oximetry

  • Range: 1% to 99%
  • Resolution: 1%
  • Accuracy (DOX only): 70% to 99% range: ±2%;
  • 50% to 69% range: ±3%;
  • <50%: unspecified
  • Accuracy (OxiMax Only): 70% to 99% range: ±2%;
  • <70%: unspecified
  • Method: Dual wavelength LED
  • Audio: Tone with each detected pulse; pitch varies with saturation

Heart (Pulse) Rate

  • Range: 20 to 300bpm
  • Accuracy (DOX only): Greater of ±1bpm or ±1%, of reading
  • Unspecified for <30 or >240 bpm
  • Accuracy (OxiMax only): Greater of ±1bpm or ±1%, of reading
  • Unspecified for <30 or >240 bpm
  • Update Time: Every second
  • Resolution: 1bpm
  • Pulse Volume: 10 levels or Off

Temperature (optional)

  • Type: FILAC FasTemp™
  • Method: Predictive or Continuous
  • Channels: 1
  • Range: 30.0º to 43.0º C
  • Accuracy Continuous Mode:±0.2°F (±0.1°C)
  • Accuracy Predictive Mode: ±0.2°F (±0.1°C) for ranges 37°C to 39 °C
  • (Compliant with EN 12470-3 and
  • ASTM E1112:98)
  • Resolution: 0.1º F or 0.1º C
  • Predictive Response Time: Oral: 10 seconds typical;
  • Axial: 10 seconds typical;
  • Rectal: 10 seconds typical
  • Probes/Wells: Oral/Axial FILAC FasTemp [202026]
  • Rectal FILAC FasTemp (optional) [202034]
  • Isolation Well, Oral, Axial [202089]
  • Isolation Well, Rectal (optional) [202087]

Alarms

  • Indication: Audible; Visual
  • Volume: 10 levels or Off
  • Silence: Yes; 2 minutes or permanent

Mechanical

  • Weight: Base unit with battery: 6.95 lb; 3.15kg
  • Size: Base unit: 8.7" (H) x 7.1" (W) x 6.5” (D); 22cm (H) x 18cm (W) x 16.5cm (D)

Power Requirements

  • Voltage: 100 to 240 VAC, 50 to 60 Hz
  • Battery: Sealed lead acid; Life: 8 hours
  • Rechargeable: 6 hours

Environmental

  • Operating Temperature: 32º to 113º F; 0º to 45º C
  • Storage Temperature: 23º to 122º F; -5º to 50º C
  • Operating Humidity: 15% to 90%, non-condensing

Classification

  • Type of Protection: Class I equipment
  • Degree of Protection: Type CF defibrillator-proof equipment
  • Protection against Ingress: IPX1 rating, Drip-Proof Equipment

Designing

Thorough study of construction, technological and operational tasks, taking into account the requirements stipulated by the relevant regulatory documents for the design of hospitals and polyclinics. 3D-visualization of architectural solutions and technological processes.

Manufacturing

Production of high-tech equipment for medical gas supply systems, which includes compressor and vacuum stations, oxygen generators and a wide range of medical consoles and their components. The production meets the requirements of domestic and European quality and safety standards.

Construction

Our specialists carry out a full list of works on construction, overhaul and reconstruction of health facilities, including such stages as: organization and holding of a tender, obtaining initial permits, passing state expertise, technical supervision and construction control, putting the facility into operation.

Supply of equipment

Equipping of medical institutions with high-tech equipment and medical equipment of leading domestic and foreign manufacturers. Monitoring of technical innovations allows you to purchase medical engineering systems and equipment of the latest generation with effective innovative solutions.

Installation

Installation of medical gas systems, equipment, ventilation systems, as well as structural elements of clean rooms. WestMedGroup provides a full range of installation services using the latest advanced technologies.

Maintenance

Maintenance and repair of medical equipment in accordance with the manufacturer's standards. Specialists of our company restore the efficiency of the equipment, replace the units worn out during operation. The guarantee of impeccable quality of the works performed is the availability of WestMedGroup's existing quality management system, licenses for production and maintenance of medical equipment.

Training

Professional development, training and retraining of technical staff in designing health systems of gas supply, installation, operation and maintenance of the medical equipment is carried on professional courses and workshops, after which the certificate is issued

Write answer 2 + 2 =

By clicking the "Send request" button, you consent to the processing of your personal data. Privacy Policy
Thansk!

Your message has been sent.

We will contact You.