Go to top

Oxygen concentrator PRO2XY®

PRO2XY®

Air is a mixture of different gases with a proportion of 78% nitrogen, 21% oxygen, and 1% argon and others gases. Oxygen Generator separates oxygen from compressed air through a pressure swing adsorption (PSA) process. The synthetic zeolite of the molecular sieve adsorbs nitrogen and concentrates the oxygen up to a level of 95%. Furthermore, the oxygen flow is kept constant thanks to the two cylinders filled with molecular sieve (synthetic zeolite).

Advantages: fully automated, high reliability, low maintenance, payback of 2-3 years.

PRO2XY® - 5 BAR

  • Oxygen available upon request or continuously
  • Economic oxygen production
  • Simple and reliable production technology
  • Constant flow and pressure of oxygen no matter the consumption (MIL'S patent)
  • Pressure at 5 bar maxi for single stage network pressure
  • PROCOM 2 control device (see page 19)
  • Very compact system
  • Low maintenance requirements
  • Complies with ISO 10083

Range complying with 2007/47/CE directive

Process sequence

  • Flow from 4 to 14 Nm³/h @ 93%
  • Purity maxi. > 95%
  • Oxygen exhaust pressure : 5 bar
  • O2 measurement by heated and regulated paramagnetic sensor and with back pressure regulator
  • CO / CO2 monitoring (optional)
  • Dew point monitoring of O2 (optional) and of air (optional)
  • Ambient O2 monitoring (optional)
  • Power consumption monitoring (optional)
  • Working temperature from 5°C to 45°C
  • Continuous running 24 hours (7/7)
  • Power supply : 1-phase 230V - 50 / 60 Hz

PRO2XY® without booster

ОХ3

ОХ5

ОХ7

ОХ13

ОХ26

Flow @ 95% (Nm³/h)

3

4,5

7

13

26

Flow @ 93% (Nm³/h)

4

5

9

14,3

Air inlet pressure

6,5 bar

Oxygen exhaust pressure

4,5 - 5,5 bar

Required air flow (Nm³/h)

40

60

93

150

consult us

Oxygen storage tank volume @5 bar

200l

500l

consult us

Weight (kg)

290

440

640

1320

consult us

Required air plant in 11 bar

HOSPITAIR® PACK S

MVA 8

MVB 12

MVB 16

MVD 22

consult us

PRO2XY® - 12 BAR

  • Oxygen available upon request or continuously
  • Economic oxygen production
  • Simple and reliable production technology
  • Constant flow and pressure of oxygen no matter the consumption (MIL'S patent)
  • Pressure at 12 bar maxi for double stage network pressure
  • PROCOM 2 control device (see page 19)
  • Very compact system
  • Low maintenance requirements
  • Complies with ISO 10083

Process sequence

  • Flow from 4 to 14 Nm³/h @ 93%
  • Purity maxi. > 95%
  • Oxygen storage pressure: 12 bar / 9 bar : after pressure release on network
  • O2 measurement by heated and regulated paramagnetic sensor and with back pressure regulator
  • CO / CO2 monitoring (optional)
  • Dew point monitoring of O2 (optional) and of air (optional)
  • Ambient O2 monitoring (optional)
  • Power consumption monitoring (optional)
  • Working temperature from 5°C to 45°C
  • Continuous running 24 hours (7/7)
  • Power supply: 1-phase 230V - 50 / 60 Hz

PRO2XY® с усилителем

ОХ3 В

ОХ5 В

ОХ7В

ОХ13В

Flow @ 95% (Nm³/h)

3

4,5

7

13

Flow @ 93% (Nm³/h)

4

5

9

14,3

Air inlet pressure

6,5 bar

Oxygen exhaust pressure

12 bar maxi

Required air flow (Nm³/h)

51

77

113

190

Oxygen storage tank volume @5 bar

200 l

500 l

Oxygen storage tank volume @12 bar

500 l

1000 l

Weight (kg)

320

470

670

1350

Required air plant in 11 bar HOSPITAIR® PACK S

MVВ 12

MVB 16

MVB 16

MVD 22

Oxygen high pressure cylinder filling station

  • Oil-free piston pneumatic booster(s)
  • Multi-stage compression
  • Simple and robust compression technology
  • No pollution of O2 during compression
  • Low maintenance requirements
  • PROCOM 2 regulation device
  • Supply with pressure release line at 4 bar or 7 bar on the O2 network
  • Possible association with filling skid design for gas cylinders
  • Maximum pressure : 200 bar
  • 1-phase, 230V – 50 / 60 Hz

AIR/O2 COMBINED CONTAINER

1 air plant / 1 PRO2XY® generator

  • Two compartments : one for air supply and one for oxygen production
  • O2 measurement by heated and regulated paramagnetic sensor and with back pressure regulator
  • Compact design
  • Simplified setting
  • Ready-to-run plants

MVA 8 + OX 3

3500

2500

MV 8 12 + OX 5

3500

2500

MV 8 12 + 0X38

4000

2700

MV8 l6 + OX 5B

4000

2700

MV 8 16 + OX 7

4000

3000

MVC 18 + OX 7B

4700

3200

MVD 22 + OX 13

5000

4000

MVD 30 + OX 13B

5000

4200


Standard power supplies

  • 3-phase, 400V / 50Hz
  • Other tensions on request

Designing

Thorough study of construction, technological and operational tasks, taking into account the requirements stipulated by the relevant regulatory documents for the design of hospitals and polyclinics. 3D-visualization of architectural solutions and technological processes.

Manufacturing

Production of high-tech equipment for medical gas supply systems, which includes compressor and vacuum stations, oxygen generators and a wide range of medical consoles and their components. The production meets the requirements of domestic and European quality and safety standards.

Construction

Our specialists carry out a full list of works on construction, overhaul and reconstruction of health facilities, including such stages as: organization and holding of a tender, obtaining initial permits, passing state expertise, technical supervision and construction control, putting the facility into operation.

Supply of equipment

Equipping of medical institutions with high-tech equipment and medical equipment of leading domestic and foreign manufacturers. Monitoring of technical innovations allows you to purchase medical engineering systems and equipment of the latest generation with effective innovative solutions.

Installation

Installation of medical gas systems, equipment, ventilation systems, as well as structural elements of clean rooms. WestMedGroup provides a full range of installation services using the latest advanced technologies.

Maintenance

Maintenance and repair of medical equipment in accordance with the manufacturer's standards. Specialists of our company restore the efficiency of the equipment, replace the units worn out during operation. The guarantee of impeccable quality of the works performed is the availability of WestMedGroup's existing quality management system, licenses for production and maintenance of medical equipment.

Training

Professional development, training and retraining of technical staff in designing health systems of gas supply, installation, operation and maintenance of the medical equipment is carried on professional courses and workshops, after which the certificate is issued

Write answer 2 + 2 =

By clicking the "Send request" button, you consent to the processing of your personal data. Privacy Policy
Thansk!

Your message has been sent.

We will contact You.