Size: А А А Interval: AB AB AB Colors: А А А А Images: Включить графику Выключить графику
Regular versionRegular version
Medical stretchers Spencer 105Compact foldable transport stretcher.Подробнее
Medical stretchers Spencer 200Lengthwise compact foldable stretcher.Подробнее
Medical stretchers Spencer 205Compact folding transport stretcher with wheels.Подробнее
Medical stretchers Spencer 250Lengthwise compact foldable stretcher.Подробнее
Medical stretchers Spencer 281Emergency stackable stretcher with head support.Подробнее
Medical stretchers Spencer 310Foldable emergency stretcher with backrest.Подробнее

Medical stretchers Spencer 100

Medical stretchers Spencer 100

Spencer 100 is used as a secondary stretcher in ambulances or as an emergency stretcher in industrial areas. Complete with two orange quick-release restraints.

The aluminium structure is characterised by its lightness and robustness. In order to guarantee stability on uneven surfaces, the feet are made of thermally treated aluminium. The aluminium frame is connected to stainless steel spacers, to make the complete structure of the 100 Series completely rust proof. Even on high loads, the stainless steel joints support the patient's weight longitudinally, avoiding problematic flexion. The 600 D nylon sheet, covered with vinyl SPEN-TEX is impermeable, fire-resistant, high frequency welded, easy to wash and sanitise.

The entire 100 Series has been produced evaluating reduced clutter for storage space and transportation, offered by the structure that folds in half. For this reason the emergency stretchers of the 100 Series are indispensable as reserve/subsidiary stretchers in the organisation of major emergencies, in industrial accident prevention and in sport.

  • Size: 1878 x 478 mm / 914 x 478 mm
  • Weight: 7,3 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 105

Medical stretchers Spencer 105

Characterised by four feet that disappear into the space provided from the closure of the two half-frames. Complete with two quick-release orange restraints.

Medical stretchers Spencer 105 has a robust but light structure, which is combined with rapid and precise mechanisms. The compactness of this series of stretchers is also determined by the lengthwise folding of the frame and by the disappearance of the feet and the wheels when stored. The mechanisms that allow the stirrups to rotate are made of stainless steel and are supported by self-lubricating washers. The sheet is made of 600 D nylon covered in vinyl and is fire-resistant. They are stretchers which respond to the needs of high functionality during use and of reduced clutter with regards to storage. The compactness of these stretchers make them ideal as a subsidiary stretcher in air, water or land ambulances.

  • Size: 2010 x 480 mm / 1006 x 480 mm
  • Weight: 5,8 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 110

Medical stretchers Spencer 110

This stretcher is used by the armed forces and in sporting fields; installation is very quick. The Spencer 111 model is characterized by four telescopic handles. Complete with two orange quick-release restraints.

The aluminium structure is characterised by its lightness and robustness. In order to guarantee stability on uneven surfaces, the feet are made of thermally treated aluminium. The aluminium frame is connected to stainless steel spacers, to make the complete structure of the 100 Series completely rust proof. Even on high loads, the stainless steel joints support the patient's weight longitudinally, avoiding problematic flexion. The 600 D nylon sheet, covered with vinyl SPEN-TEX is impermeable, fire-resistant, high frequency welded, easy to wash and sanitise.

The entire 100 Series has been produced evaluating reduced clutter for storage space and transportation, offered by the structure that folds in half. For this reason the emergency stretchers of the 100 Series are indispensable as reserve/subsidiary stretchers in the organisation of major emergencies, in industrial accident prevention and in sport.

  • Size: 2014 x 550 / 2014 x 180 mm
  • Weight: 6,7 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 122

Medical stretchers Spencer 122

Thanks to reduced clutter, the stretcher is used as an emergency stretcher and also in conditions where storage space lacks. Complete with two orange quick-release restraints.

The aluminium structure is characterised by its lightness and robustness. In order to guarantee stability on uneven surfaces, the feet are made of thermally treated aluminium. The aluminium frame is connected to stainless steel spacers, to make the complete structure of the 100 Series completely rust proof. Even on high loads, the stainless steel joints support the patient's weight longitudinally, avoiding problematic flexion. The 600 D nylon sheet, covered with vinyl SPEN-TEX is impermeable, fire-resistant, high frequency welded, easy to wash and sanitise.

The entire 100 Series has been produced evaluating reduced clutter for storage space and transportation, offered by the structure that folds in half. For this reason the emergency stretchers of the 100 Series are indispensable as reserve/subsidiary stretchers in the organisation of major emergencies, in industrial accident prevention and in sport.

  • Size: 2014 x 550 mm / 1006 x 550 mm
  • Weight: 6,9 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 200

Medical stretchers Spencer 200

If the ground supports are not used, the stretcher can be used for quick transfer of the patient, and above all when the patient has to be transferred onto a primary stretcher. Complete with two quick-release orange restraints.

The structural and functional characteristics of the 200/300 Series stretchers make them optimal for use as a secondary stretcher or in any situation where storage space is limited. The choice of a particularly resistant aluminium alloy, has allowed Spencer to reduce the weight but at the same time to preserve the excellent capacity characteristics; the use of stainless steel for the joints, the structural parts, the feet and the stirrups gives the product absolute resistance to atmospheric agents. Not least, the superficial treatment of the aluminium carried out after the folding process, guarantees long duration. The shifting of the wheels and the feet towards the centre allows the stretcher to slide along narrow surfaces. The sheet modelled and reinforced by ultrasound soldering can be regulated and adapted. It is easily washed and if necessary easily replaced.

  • Size: 1855 x 478 mm /  930 x 478 mm
  • Weight: 6,8 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 205

Medical stretchers Spencer 205

Characterised by two feet and two wheels that disappear into the space formed on from the closure of the two half-frames. The presence of the two wheels allows it to slide on the ambulance floor. Complete with two quick-release orange restraints.

The Slim Series has a robust but light structure, which is combined with rapid and precise mechanisms. The compactness of this series of stretchers is also determined by the lengthwise folding of the frame and by the disappearance of the feet and the wheels when stored. The mechanisms that allow the stirrups to rotate are made of stainless steel and are supported by self-lubricating washers. The sheet is made of 600 D nylon covered in vinyl and is fire-resistant. They are stretchers which respond to the needs of high functionality during use and of reduced clutter with regards to storage. The compactness of these stretchers make them ideal as a subsidiary stretcher in air, water or land ambulances.

  • Size: 1855 x 478 mm /  930 x 478 mm
  • Weight: 6,8 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 250

Medical stretchers Spencer 250

If the ground supports are not used, the stretcher can be used for quick transfer of the patient, and above all when the patient has to be transferred onto a primary stretcher. Complete with two quick-release orange restraints.

The structural and functional characteristics of the 200/300 Series stretchers make them optimal for use as a secondary stretcher or in any situation where storage space is limited. The choice of a particularly resistant aluminium alloy, has allowed Spencer to reduce the weight but at the same time to preserve the excellent capacity characteristics; the use of stainless steel for the joints, the structural parts, the feet and the stirrups gives the product absolute resistance to atmospheric agents. Not least, the superficial treatment of the aluminium carried out after the folding process, guarantees long duration. The shifting of the wheels and the feet towards the centre allows the stretcher to slide along narrow surfaces. The sheet modelled and reinforced by ultrasound soldering can be regulated and adapted. It is easily washed and if necessary easily replaced.

  • Size: 1878 x 478 mm / 914 x 478 mm
  • Weight: 5,8 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 280

Medical stretchers Spencer 280

An essential design that characterises the traditional functionality of stackable stretchers. Complete with two quick-release orange restraints. Reflective mark to increase nocturnal visibility.

Stackable stretchers. This range is necessary whenever a large amount of stretchers need to be stored in a reduced amount of space. The structure of the Stock Series stretchers is made with a resistant but light aluminium alloy. The supports perform the function of spacers with the stretcher placed on the floor and also of storage with the stretcher placed one on top of the other. The tension of the sheet can be predetermined thanks to regulation with a rapid and precise system, achieved with poly-propylene straps. The sheet is made of 600 D nylon and is coated in vinyl. It is fire resistant and impermeable, making it easily sanitised. The superficial treatment of the aluminium guarantees long duration. Less clutter means the storage of more stretchers, if necessary also with head support; this characteristic makes them ideal to equip mobile systems for maxi emergency situations and they are indispensable for emergency medicine.

  • Weight: 6 kg
  • Load capacity: 170 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 281

Medical stretchers Spencer 281

The only stackable stretcher with adjustable head support. The joints and the frame are made of stainless steel. These stackable stretchers can be used with patients waiting for transfer to hospital; longer permanence reinforces the need to guarantee comfort and the correct posture of the patient. Complete with two quick-release orange restraints. Reflective mark to increase nocturnal visibility.

Stackable stretchers. This range is necessary whenever a large amount of stretchers need to be stored in a reduced amount of space. The structure of the Stock Series stretchers is made with a resistant but light aluminium alloy. The supports perform the function of spacers with the stretcher placed on the floor and also of storage with the stretcher placed one on top of the other. The tension of the sheet can be predetermined thanks to regulation with a rapid and precise system, achieved with poly-propylene straps.

The sheet is made of 600 D nylon and is coated in vinyl. It is fire resistant and impermeable, making it easily sanitised. The superficial treatment of the aluminium guarantees long duration. Less clutter means the storage of more stretchers, if necessary also with head support; this characteristic makes them ideal to equip mobile systems for maxi emergency situations and they are indispensable for emergency medicine.

  • Weight: 6 kg
  • Load capacity: 170 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Medical stretchers Spencer 310

Medical stretchers Spencer 310

The structural and functional characteristics of Spencer 310 make it optimum for use as a subsidiary stretcher or in any situation when storage is limited. The frame is made of polished aluminium, the stirrups are made of stainless steel. The sheet is made of 600 D electrically soldered SPEN-TEX. The backrest is adjustable in different positions, with a mechanical blocking apparatus for safety. The anterior wheels and the posterior feet are moved to the centre of the stretcher to reduce the clutter of the resting surface. Complete with two quick-release orange restraints.

The choice of a particularly resistant aluminium alloy, has allowed Spencer to reduce the weight but at the same time to preserve the excellent capacity characteristics; the use of stainless steel for the joints, the structural parts, the feet and the stirrups gives the product absolute resistance to atmospheric agents. Not least, the superficial treatment of the aluminium carried out after the folding process, guarantees long duration. The shifting of the wheels and the feet towards the centre allows the stretcher to slide along narrow surfaces. The sheet modelled and reinforced by ultrasound soldering can be regulated and adapted. It is easily washed and if necessary easily replaced.

  • Size: 1855 x 478 mm / 930 x 478 mm
  • Weight: 8,7 kg
  • Load capacity: 158 kg
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru
You can request additional information about the equipment,
and also find out the cost and make an order by writing to us at info@westmedgroup.ru