Size: А А А Interval: AB AB AB Colors: А А А А Images: Включить графику Выключить графику
Regular versionRegular version
Go to top

Patient monitors

NARCOTREND

NARCOTREND

The Narcotrend™ is a new EEG monitor designed to measure the depth of anaesthesia based on a 6-letter classification from A (awake) to F (general anaesthesia with increasing burst suppression) and divided into 14 substages (A, B0–2,C0–2,D0–2,E0,1,F0,1).

The powerful EEG monitor for the operating room and intensive care unit helps optimise the quality of anaesthesia and sedation by:

  • Individually adjusted dosage of anaesthetics/narcotics
  • Prevention of intra-operative awareness
  • Prevention of unnecessarily deep stages of anaesthesia
  • Reduction of unwanted side-effects
  • Saving of anaesthetics
  • Short waking times
  • Short stay in the waking room
  • Prevention of unnecessarily long stay in the intensive care unit

2 versions:

  • 1-channel version for assessing the EEG under general anaesthesia
  • 2-channel version e.g. for comparison of both hemispheres at carotis surgery

Extremely low operating and maintenance costs:

  • Standard ECG electrodes as well as cup and needle electrodes can be used.
  • Automatic classification of the EEG for intravenous and inhalational anaesthetics
  • New: EEG index
  • Optimised recognition of artefacts
  • Easy operation via touch screen
  • Continuous testing of the electrodes to ensure a constantly high quality of the EEG signal
  • Variable electrode positions
  • Interface to external monitors and documentation systems
  • Report function for documentation of EEG recordings
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

ARGUS PRO LifeCare™

ARGUS PRO LifeCare™

Enjoy the power of a lightweight patient monitoring system in a compact 2.1 kg package. Powerful, Compact and Extremely Lightweight.

One of the most powerful intensive care patient monitors goes mobile – with defibrillator and transcutaneous pacemaker! Enjoy the power of lightweight patient monitoring in emergency care with ARGUS Pro LifeCare.

Whatever the requirement: emergency care, inter-hospital or in-house patient transfer. The ARGUS Pro LifeCare assists you without compromise. And all this power in a unique, compact 2.1 kg package.

The ARGUS Pro LifeCare covers:

  • Full diagnostic ECG (I, II, III, aVR, aVL, aVF, V1-V6)
  • NIBP
  • SpO2 with plethysmogram
  • etCO2 with capnogram
  • 2 temperatures
  • 2 invasive blood pressures
  • Defibrillator with AED and MANUAL mode
  • Extremely gentle defibrillation energy using Multipulse Biowave® (biphasic pulsed defibrillation impulse, patented)
  • Transcutaneous pacemaker

The bright, clear 4.8″ screen can display 3 waveforms with 7 parameter measurements providing a complete patient overview. All acquired data, including voice recording, is stored by the ARGUS Pro LifeCare for later external review or case analysis.

The combination of SCHILLER Multipulse Biowave® AED/manual defibrillator, pacemaker and monitoring functions is unique and opens many new horizons in emergency care and hospital applications. Plus, ARGUS PRO LifeCare can additionally be used in combination with the ARGUS Pro Transport monitor to provide the full range of patient monitoring.

Optional extras include:

  • Shock frame with rescue bag and handle
  • etCO2 mainstream sensor
  • External thermal 3-channel printer
  • ARGUS PRO LifeCare charging unit
  • Full range patient monitoring with ARGUS PRO Transport
  • Defibrillator Type: External, Automated (AED)
  • Height: 115 mm
  • Length: 90 mm
  • Weight: 2.1 kg
  • Width: 210 mm
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

ARGUS PRO Transport

ARGUS PRO Transport

Experience the new freedom in intensive care monitoring. The ARGUS PRO Transport is an intensive care monitor which meets the specific needs of clinics and rescue services. The unit provides full performance for bedside and transport, without restrictions regarding the measured parameters.

Target group:

  • Intensive care unit
  • Operating theatre
  • Recovery room
  • Emergency ward
  • Rescue services

Operative range:

  • Patient monitoring in the emergency ward, the recovery room and the intensive care unit
  • Transport of monitored intensive care patients within the clinic
  • Interhospital transfer of intensive care patients by ambulance or helicopter

Unit performance:

In spite of its small size and low weight, the ARGUS PRO Transport provides the full functionality of the highest capacity intensive care monitoring systems of today. Its intuitive user interface, which is operated via touch screen, provides direct access to all important settings of the shown parameters. An unlimited number of display configurations can be saved so you can adapt the display to the needs of any monitoring situation.

Being part of the ARGUS PRO System, the ARGUS PRO Transport can display the data of any other ARGUS PRO monitor within the clinic network

The optional 4-in-1 mobile card gives you the additional possibility to send resting ECG data to a fax or a web server for further diagnosis. Your intranet data can the be accessed via VPN for process/procedure optimisation or to support your mobile units.

  • Height: 345 x 270 x 55 mm (l x w x h)
  • Weight: 3.2 kg (including rechargeable batteries)
  • Casing:Glass fiber reinforced ABS plastic/aluminium
  • Power supply: 2 rechargeable lithium ion batteries (52 Wh each);115 V – 230 V; external battery charger
  • Optional: 9 V - 56 V DC IN/18 DC V OUT; external battery charger
  • TFT display:1024 x 768, 10.4“ touch screen
  • CPU/RAM/HD: 800 MHz/256 MB/20 GB
  • Interfaces:  1 x PS2, 2 x USB, loudspeaker, micro, 2 x PCMCIA multiport adapter for docking station
  • Standards: EN 60601-1, , class I 93/42/EEC
  • Operating temperature:0 °C – 45 °C
  • Docking station (optional)
  • System:Dimensions: 200 x 265 x 230 mm (l x w x h)
  • Weight: 2.5 kg
  • Casing:Metal/aluminium
  • Power supply: 115 V – 230 V internal power supply unit/battery charger
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

ARGUS LCM plus

ARGUS LCM plus

Vital Data Patient Monitoring, 6-channel ECG with 3-lead cable

The SCHILLER ARGUS LCM monitor – for the comprehensive vital data monitoring of adults, pediatrics and neonates.

It is suitable for intra-hospital transport as well as in the ward

Features/Parameters:

  • 24-hour trend memory for all parameters
  • Respiration monitoring via impedance measurement
  • Temperature measurement (rectal, skin or ear)
  • Non-invasive blood pressure (NIBP)
  • Pulse oximetry (SpO2): Masimo™ technology or Nellcor™ technology available
  • Monitoring of all vital signs with prioritised alarms
  • Invasive blood pressure
  • etCO2 sidestream

Key Advantages:

  • Excellent price/performance ratio
  • Large, high resolution colour LCD
  • Light-weight and compact design
  • Simplified operation using direct function keys
  • Convenient carrying handle

Options:

  • Integrated additional battery
  • Integrated thermal printer
  • Nurse call
  • Board Net (12 VDC – 30 VDC)
  • Dimensions: 290 x 275 x 180 mm (h x w x d); approx. 4.6 kg
  • Power supply requirements: 90 to 250 Vac, 50/60 Hz; mains independent operation of approx. 1 hour
  • Optional: Additional battery for mains independent operation of 2 hours Colour LCD:
  • Writing speeds: 12,5/25/50 mm/s (respiration: 6.25 mm/s)
  • Display: 5, 4, 3 or 2 channels
  • Resolution: SVGA, 800 x 600 pixels
  • Diagonal size: 27 cm/10.4 inches
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

MAGLIFE C

MAGLIFE C

Magnetic Resonance Monitoring without compromise! A Master of MRI Compatibility he MRM concept offers a complete and safe solution for monitoring high risk patients undergoing MRI examination or MRI surgery. Besides it is much more than a simple adaptation or modification of a standard monitor.

All problems caused by emitted radio frequencies, magnetic and elecromagnetic fields are resolved safely and reliably, the quality of the MR images stays unimpaired.

The concept:

  • Maglife C Plus MR monitor compatible with 0,2 Tesla to 3,0 Tesla imagers of all manufacturers
  • Magscreen, remote control and display unit, placed outside the Faraday cage. The fiber optic link with Maglife C Plus ensures safe, reliable and interference free data transmission.
  • ECG Gating, for best Cardio-Vascular MR imaging
  • Magfile, Software with special fiber optic interface and PC. Offers the facility to save all parameters monitored during the MRI examination; printout provides a full anaesthetic report
  • Magmove, non-magnetic trolley

Unique patented @SCS(Source CleanedSignal) ECG with maximum Gradient Noise Suppression.

The unique @SCS ECG is a standard on all Maglife C Plus. Maximum patient safety is achieved by a patented fiber optic ECG technology.

It offers in all circumstances a QRS cleaned at source from noise generated by gradient sequences of the MRI machine. The optional  Maglife C  Plus Cardiac Gating module links the @SCS ECG signal by fiber optic direct to any MRI machine, providing:

  • Precise ECG Triggering/Gating
  • Shortest QRS Delay
  • Easiest interfacing to all MRI Systems
  • Maglife C Plus MR monitor compatible with 0,2 Tesla to 3,0 Tesla imagers of all manufacturers
  • Magscreen, remote control and display unit, placed outside the Faraday cage. The fiber optic link with Maglife C Plus ensures safe, reliable and interference free data transmission.
  • ECG Gating, for best Cardio-Vascular MR imaging
  • Magfile, Software with special fiber optic interface and PC. Offers the facility to save all parameters monitored during the MRI examination. Printout provides a full anaesthetic report.
  • Magmove, non-magnetic trolley

Customised conveniences:

Thanks to its numerous options, Maglife C Plus can be configured to your exact needs. From its basic configuration (ECG, SpO2, NIBP), Maglife C Plus is entirely evolutionary. Maglife C Plus can be upgraded at any time with the following optional parameters/ features:

  • EtCO2 - N2O - Respiration - FiO2
  • Anesthetic Agents (5)
  • Temperature
  • 2 Invasive Blood Pressure channels
  • 2 Trace Recorder
  • ECG Gating
  • Magscreen
  • Magfile
  • Magmove

Wireless transmission:

  • Based on the latest Bluetooth technology.
  • Optional wireless transmission between Maglife C Plus and the fiber optic link to Magscreen, allow free moving of the Maglife C Plus within the Faraday cage or when used with a multiple installed base.

Unlimited autonomy:

  • Maglife C Plus has an integrated Mains

Power supply. An additional built-in battery guarantees uninterrupted functioning when moving.

  • Weight: 32 kg (fully equipped)
  • Dimensions: 350 x 430 x 400 mm (h x w x d)
  • Mains: 100 / 115 / 230 Volts / 50 / 60 Hz
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

MAGLIFE light

MAGLIFE light

MAGLIFE light is the ideal patient monitor for your routine MRI examinations. Compact and easy to use, MAGLIFE light does not require any installation and has been designed for daily use.

SCHILLER, the undisputed world wide leader of MRI patient monitoring, has complemented its successful Maglife product line with the MAGLIFE light. Now MRI monitoring is within reach of virtually every MRI Center. MAGLIFE light can handle all your monitoring needs and is compatible with MRI scanners up to 3 Tesla. MAGLIFE light has a large colour screen visible from the control room, displaying the patient's SPO2, pulse rate and/or NIBP values. The sensors are suitable for all types of patient – adults, children, neonates and premature infants.

MAGLIFE light can handle all your monitoring needs and is compatible with MRI scanners up to 3 Tesla. The sensors are suitable for all types of patients – adults, children and neonates.

Features:

  • Indication of SpO2, pulse, heart rate and non-invasive blood pressure values (Sys, Dia, MAP)
  • Displays the most recent NIBP values
  • 24 hour trend
  • Display of patient values on large colour screen visible from across the room
  • Mains and battery power supply
  • Visual and audible alarms
  • Low-battery alarm
  • Integrated magnetic field detector
  • Operates at up to 400 Gauss (40 mT)
  • Standby mode for instant restarting
  • USB key printing for documentation
  • Downloadable software
  • Low weight and easy to handle
  • For installation on stand, shelf, articulated arm

Versions/options:

  • SpO2 and NIBP
  • SpO2
  • NIBP
  • Non-magnetic trolley with accessory basket
  • Dimensions: 130x180x278 mm
  • Weight: 2.7 kg
  • Power: 100V to 240V AC, 50 Hz/60 Hz, 28 to 38 VA, battery
  • Operation temperature: 10 °C to 40 °C
  • Transport and Storage Temperature: -20 °C to 50 °C
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

VitalView System 4

VitalView System 4

48 INDEPENDENT ECG TRACES I 16 PATIENTS I WINDOWS COMPATIBLE

Features:

  • Displays Arrhythmia and ST analysis provided by Criticare monitors with Arrhythmia and ST option.
  • Functions on both single and dual monitor setups.
  • Disclosure of up to 144 hours of ECG data.
  • Easily accessible alarm history log for all patient alarms occurring in the previous 24 hours.
  • Quickly generate and send customized e-mail patient data reports in PDF format.
  • Displays ECG, SpO2, IBP and CO2 waveforms.
  • Remote activation of NIBP and printing.

VitalView CSS ® is an ideal solution for hospitals of all sizes.

It facilitates communication between a central station and eVisionTM, nCompassTM, the nGenuity TM Series as well as the VitalCare TM Series of patient monitors for continuous, comprehensive vital signs monitoring.

VitalView ® displays real-time waveforms and numerics with a simultaneous display of up to 48 waveforms across two screens. With a dual monitor display, up to three expanded patient views can be viewed while 16 patient slots continue to display patient data. ECG events, graphical trends and tabular trends are stored automatically. User adjustable alarms provide immediate notification of critical changes in patient status.

CSI has verified that Microsoft ® Office XP Pro 2003, OpenOffice 2.0, and Abobe ® Reader will not compromise real-time monitoring performance.

  • Display
    • Configurations: Up to 48 independent ECG traces
    • Patients Displayed: 8 or 16
    • Modes: 1 x 8, 2 x 4, 1 x 16, or 2 x 8 patient slots; up to three detailed patient views
  • Alarms
  • Description: User-configurable for all monitored parameters
  • ST/Arrhythmia ECG: High PVC/Min, PVC Run,
  • ECG: Couplets, ECG: Bigeminy,
  • ECG: Trigeminy, ECG: Irregular HR,
  • ECG: VT>2,
  • ECG: VTach, ECG: VFib,
  • ECG: VFib/Asystole, ST high or low for
  • ECG Leads I, II, III, aVR, aVL, aVF, V
  • Non-ST/Arrhythmia ECG: ECG lost
  • Limit: High/Low HR, NIBP, SpO2, etc. (all monitored parameters)
  • Lead Disconnect: Fault RA, LA, LL, V
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

ARGUS VCM

ARGUS VCM

Schiller Vital Sign ARGUS VCM Patient Monitor, with Blood Pressure Monitor & SPo2 & Temperature Simple for simple and accurate vital signs assessment and continuous monitoring, ideal solution for taking routine patient vital signs or monitoring before, during and after procedures, minor surgery and treatments in a variety of settings.

  • Integrated thermal printer
  • Large LED digital display
  • User-friendly interface
  • 2 hours mains independent operation
  • Automatic self-test
  • RS-232 for connectivity and Nurse Call connection
  • Suitable for adults, pediatrics and neonates
  • Power: mains; rechargeable 6 V 4 Ah SLA battery
  • Battery charger: buit-in charger
  • Display: LED
  • Memory: up to 200 measurements
  • Printer/recorder: yes: internal
  • Connection interface: RS-232; nurse call via RS232
  • Pressure range: 0 - 300 mmHg
  • Systolic pressure range: adult: 30 - 260 mmHg; paediatric: 30 - 160 mmHg; neonate: 25 - 120 mmHg
  • Diastolic pressure range: adult: 20 - 235 mmHg; paediatric: 15 - 130 mmHg; neonate: 10 - 105 mmHg
  • Pulse rate range: 30 - 220 bpm
  • Automatic measurement cycles: 1, 2, 3, 4, 5, 10, 15, 30, 45, 60, 90, 120 or 240 mins; also 'Stat'
  • Paediatric/neonate: yes
  • Cuff sizes: reusable: neonate sizes 1 to 4; infant; small child; child; small adult; adult; large adult; thigh
  • Physical size: 180 x 278 x 130 mm
  • Weight: 2.7 kg
  • Mounting options: rolling stand
LinkLanguageSize
Schiller Argus VCM - User manualEnglish7,9 mbpdf
Schiller_Argus_VCM_-_Service_manualEnglish3,7 mbpdf
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

Monitor 506N3 VitalCare

Monitor 506N3 VitalCare

Designed to travel everywhere you do, the VitalCareTM 506N3 series patient monitor with integrated carry-handle attaches quickly and easily to a rolling stand. Available in multiple configurations – with choice of Criticare or Nellcor oximetry – the 506N3 patient monitors provide maximum versatility and cost-effectiveness. New smart battery management allows up to 100 NIBP measurements on a single charging. With a compact design that is easily setup for spotcheck or continuous monitoring, the 506N3 patient monitor adapts readily to hospital, clinic and transport requirements.

Features and Benefits

  • Proprietary ComfortCuff ™ NIBP measures on inflation for faster, more comfortable readings.
  • Choice of Criticare DOX™ digital SpO2 technology or Nellcor OxiMax™ SpO2 technology.
  • Audible and visual alarms are adjustable providing instant notification the way you need them.
  • Optional FILAC FasTemp™ predictive temperature for quick, accurate measurements.
  • Optional internal printer for on-demand, automatic interval, trends or multi-patient reports.

Non-Invasive Blood Pressure

  • Technique: Oscillometric measure upon inflation
  • Measurement Time: <40 seconds typical; 0 to 300mmHg;
  • standard adult cuff
  • Automatic Measurement
  • Cycles: 1 - 60 minute; 2 - 4 hour; STAT
  • Inflation Pressure Range: 30 to 300mmHg (Adult)
  • 30 to 150 mmHg (Pediatric)
  • 20 to 150 mmHg (Neonate)
  • Resolution: 1 mmHg
  • Clinical Accuracy: SP-10:2002
  • Transducer Accuracy: ±2mmHg or ±2% of reading, whichever is
  • greater, over full range
  • STAT mode: 5 minutes of consecutive readings

Pulse Oximetry

  • Range: 1% to 99%
  • Resolution: 1%
  • Accuracy (DOX only): 70% to 99% range: ±2%;
  • 50% to 69% range: ±3%;
  • <50%: unspecified
  • Accuracy (OxiMax Only): 70% to 99% range: ±2%;
  • <70%: unspecified
  • Method: Dual wavelength LED
  • Audio: Tone with each detected pulse; pitch varies with saturation

Heart (Pulse) Rate

  • Range: 20 to 300bpm
  • Accuracy (DOX only): Greater of ±1bpm or ±1%, of reading
  • Unspecified for <30 or >240 bpm
  • Accuracy (OxiMax only): Greater of ±1bpm or ±1%, of reading
  • Unspecified for <30 or >240 bpm
  • Update Time: Every second
  • Resolution: 1bpm
  • Pulse Volume: 10 levels or Off

Temperature (optional)

  • Type: FILAC FasTemp™
  • Method: Predictive or Continuous
  • Channels: 1
  • Range: 30.0º to 43.0º C
  • Accuracy Continuous Mode:±0.2°F (±0.1°C)
  • Accuracy Predictive Mode: ±0.2°F (±0.1°C) for ranges 37°C to 39 °C
  • (Compliant with EN 12470-3 and
  • ASTM E1112:98)
  • Resolution: 0.1º F or 0.1º C
  • Predictive Response Time: Oral: 10 seconds typical;
  • Axial: 10 seconds typical;
  • Rectal: 10 seconds typical
  • Probes/Wells: Oral/Axial FILAC FasTemp [202026]
  • Rectal FILAC FasTemp (optional) [202034]
  • Isolation Well, Oral, Axial [202089]
  • Isolation Well, Rectal (optional) [202087]

Alarms

  • Indication: Audible; Visual
  • Volume: 10 levels or Off
  • Silence: Yes; 2 minutes or permanent

Mechanical

  • Weight: Base unit with battery: 6.95 lb; 3.15kg
  • Size: Base unit: 8.7" (H) x 7.1" (W) x 6.5” (D); 22cm (H) x 18cm (W) x 16.5cm (D)

Power Requirements

  • Voltage: 100 to 240 VAC, 50 to 60 Hz
  • Battery: Sealed lead acid; Life: 8 hours
  • Rechargeable: 6 hours

Environmental

  • Operating Temperature: 32º to 113º F; 0º to 45º C
  • Storage Temperature: 23º to 122º F; -5º to 50º C
  • Operating Humidity: 15% to 90%, non-condensing

Classification

  • Type of Protection: Class I equipment
  • Degree of Protection: Type CF defibrillator-proof equipment
  • Protection against Ingress: IPX1 rating, Drip-Proof Equipment
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

nGenuity 8100 E (P)

nGenuity 8100 E (P)

The flexible, easy-to-use nGenuity patient monitor with printer is the perfect solution for conscious sedation or post-procedure recovery monitoring,

The nGenuity patient monitor provides straightforward operation with a user-configurable display, enabling clinicians to quickly access the results they need. It comes with a wide variety of parameters, including advanced capabilities like ECG analysis, Capnography (ETCO)) and mini trend reporting.

  • Easy to Use: Bright and large color display has large numeric readings, making it easy to read from across the room. Straightforward menus and dedicated function keys are easy to learn.
  • Flexible: Full-featured monitors are available with many configurations including ETCO2 monitoring and arrhythmia and ST analysis. They are compatible with EMR/HIS systems and Criticare’s VitalView central station.
  • Cost effective: The optional ETCO2 features a patented high capacity water trap with full occlusion clearing. The trap can be used on multiple patients so it costs less per procedure.

Features

  • Standard features: ECG, ComfortCuff® NIBP, DOX® SpO2, Heart Rate, Temperature, Respiration and Nurse Call interface connection.
  • Optional features: End-tidal and inspired CO2, arrhythmia and ST analysis and integrated printer.
  • Optional CO2 monitoring incorporates CSI’s patented water trap design with full occlusion clearing.
  • Mini-Trends display of condensed tabular vital signs data to show recent monitoring activity.
  • Compatible with popular Electronic Medical Records (EMR) systems for both large and small offices.
  • Easy to read 10.4 inch TFT display.
  • Easy to learn, easy to use interface with simplified menus and dedicated function keys.
  • Mounts quickly to walls and rollstands.

Each monitor comes with SpO2 sensor, NIBP hose, child/small adult NIBP cuff, adult NIBP cuff, large adult NIBP cuff, ECG cable with set of electrodes, rechargeable battery, power cord, and user manual on CD-Rom. Monitors with CO2 also include: 5 water traps, 5 sampling lines, scavenging kit.

 

 

  • Weight:14 lbs; 6.4 kg
  • Size:11 in (H) x 13 in (W) x 10.3 (D); 28 cm (H) x 33 cm (W) x 26.2 cm (D)
  • Voltage: 100 to 240 VAC; 50/60 Hz
  • Power Consumption: 35 Watts, typical
  • Battery Life: 3.0 hours, typical
  • Recharge Time: 4.5 hours, typical
  • Operating Temperature:15° to 35°C
  • Storage Temperature: -5° to 50°C
  • Operating Humidity: 15% to 90%, noncondensing

 

You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

nGenuity 8100 E (P) + CO2

nGenuity 8100 E (P) + CO2

All the features and economy of the nGenuity packaged with the outstanding performance of Criticare's patented end tidal CO2 technology makes the "EP-1" an easy choice for your next anesthesia monitor. Whether you intubate or not, we have accessories that will let you reliably obtain capnography on both adult and pediatric patients.

The 8100EP-1 comes complete with the standard nGenuity accessories plus water traps, and sample lines. Roll stands and wall mounts are available.

Standard:

  • ECG
  • End Tidal CO2
  • Oxygen Saturation
  • Blood Pressure
  • Heart Rate
  • Trends
  • Printer
  • Computer and Video Interfaces

Optional:

  • Temperature
  • S-T and Arrhythmia Analysis

Features and Benefits

  • Monitors End-tidal CO2 and inspired CO2 accurately at high respiration rates.
  • Gas Monitoring with full occlusion clearing and high capacity water trap.
  • Mini-Trends can display condensed tabular vital signs data to show recent monitoring activity.
  • Compatible with popular Electronic Medical Records (EMR) systems for both large facilites and small offices.
  • Easy-to-read 10.4" active TFT color display.
  • Easy to learn, easy to use -- simplified menus and dedicated function keys.

Materials Included

  • Adult Reusable Shell Finger Sensor 10ft.
  • Adult BP Cuff Quick Connect.
  • Large Arm Adult BP Cuff.
  • NIBP Hose - 10ft. Straight.
  • ECG Cable Assembly.
  • ECG Electrodes.
  • Power Cord.
  • Operator's Manual.

Custom Configurations

  • Standard: ETCO2, INCO2, ECG, ComfortCuff™ NIBP, DOX™ SpO2, HR, Temperature, Respiration, and Nurse Call interface connection.
  • Optional: ST/Arrhythmia and printer.

Each monitor comes with SpO2 sensor, NIBP hose, child/small adult NIBP cuff, adult NIBP cuff, large adult NIBP cuff, ECG cable with set of electrodes, rechargeable battery, power cord, and user manual on CD-Rom. Monitors with CO2 also include: 5 water traps, 5 sampling lines, scavenging kit.

  • Weight:14 lbs; 6.4 kg
  • Size:11 in (H) x 13 in (W) x 10.3 (D); 28 cm (H) x 33 cm (W) x 26.2 cm (D)
  • Voltage: 100 to 240 VAC; 50/60 Hz
  • Power Consumption: 35 Watts, typical
  • Battery Life: 3.0 hours, typical (2.5 hours w/ CO2)
  • Recharge Time: 4.5 hours, typical
  • Operating Temperature: 15° to 35°C
  • Storage Temperature: -5° to 50°C
  • Operating Humidity: 15% to 90%, noncondensing

 

You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

nCompass 8100H

nCompass 8100H

The nCompass™ 8100H Series monitor is the perfect choice for busy departments demanding accurate, reliable performance.

The 8100H Series monitor can monitor adult and pediatric patients in virtually every department. The innovative user interface features simplified menus and dedicated function keys for timely setups. The big, bright display with large numerics can easily be seen from across the room.

The 8100H Series monitor mounts quickly and easily to walls and rollstands.

Features and Benefits

  • Easy-to-read 12.1" active color TFT display.
  • Easy to learn, easy to use with simplified menus and dedicated function keys.
  • Mini-Trends can display condensed tabular vital signs data to show recent monitoring activities.
  • Cardio-Respirogram Trend Display.
  • Optional invasive cardiac output interface capability.
  • Compatible with Criticare's 8500 Series Agent Gas Analyzer for anesthetic monitoring.

Technical Specifications

ECG

  • Number of Leads: 3- or 5-Lead
  • Lead View: User-selectable; I, II, III, aVR, aVL, aVF, V (5-Lead); I, II, or III (3-Lead)
  • Gain Selection: x0.5, x1, x2, and x4
  • Frequency Response: Diagnostic: 0.05 to 100 Hz (-3dB);
  • Monitor: 0.5 to 40 Hz (-3dB);
  • ST: 0.05 to 40 Hz (-3dB)
  • Electrosurgery Protection: Yes
  • Defibrillator Protection: Yes
  • Pacer Detection/Rejection: Yes
  • ST Accuracy: ±0.2 mm or ±5% of reading, whichever is greater, over heart range of 30 to 120 bpm
  • ST Range: -6.0 to 6.0 mm

NIBP (Non-Invasive Blood Pressure)

  • Technique: Oscillometric measure upon inflation
  • Measurement Cycle: < 40 sec. typical
  • Auto. Measurement Cycles: 2, 3, 5, 10, 15, 30 min; 1, 2, 4 hr
  • Max. Allowable Cuff Pressure: Adult/Pediatric: 300 mmHg; Neonate: 150 mmHg
  • Range: Adult/Pediatric: 30-300 mmHg; Neonate: 20-150 mmHg
  • Resolution: 1 mmHg
  • Transducer Accuracy: ±2 mmHg or ±2% or reading, whichever is greater,
  • over full range
  • STAT Mode: 5 min of consecutive readings
  • Clinical Accuracy: Complies with AAMI SP-10:2002

Pulse Oximetry

  • Range: 1% to 99%
  • Resolution: 1%
  • Accuracy: 70% to 99% range: ±2%; 50% to 69% range: ±3%;
  • < 50%: unspecified
  • Method: Dual wavelength LED

Heart (Pulse) Rate

  • Source: User selectable: Smart, ECG, Pleth, NIBP, IBP
  • Range: 20 to 300 bpm (ECG, Pleth);
  • 30-240 bpm (NIBP); 30-300 bpm (IBP)
  • Accuracy: ±1 bpm or ±1% (ECG) whichever is greater

Respiration

  • Rate: 6 to 150 bpm (ECG); 2 to 120 bpm (CO2)
  • Resolution: 1 bpm
  • Accuracy: ±2 bpm or ±2%, whichever is greater
  • Source: User selectable: Smart, CO2, ECG

CO2

  • Units: mmHg; %; kPa; Torr.
  • Method: Non-dispersive infrared; autocalibrating.
  • N2O Compensation: Manual (On/Off).
  • Range: 0–99 mmHg; 0–12.5%; 0–12.5 kPa; 0–99Torr.
  • Resolution: 1 mmHg; 0.1%; 0.1 kPa; 1 Torr.
  • Flow, Sample Rate: 200 ml/min.
  • Accuracy: ±2 mmHg; ±0.3 vol. %; ±0.3 kPa; ±2 Torr or ±4% of reading, whichever is greater, at 200 ml/min & respiratory rate of ≤ 120 bpm.
  • Rise Time: 170 ms (10–90%) at 200 ml/min.

IBP (Invasive Blood Pressure)

  • Channels: 1 or 3.
  • Transducer Sites: Selectable: ART, PA, LV, RV, LA, RA, CVP, ICP.
  • Pressure Range: -10 mmHg to 300 mmHg.
  • Transducer: Freq. Response 0–20 Hz; Impedance >300 ohms;
  • Sensitivity 5μV/V/mmHg.
  • Accuracy: ±1 mmHg or ±1%, whichever is greater.

Custom Configurations

  • Standard: ECG, Respiration, NIBP, HR, SPO2, Temperature, Arrhythmia and ST analysis, and Nurse Call interface connection.
  • Optional: CO2, 1 or 3 channel IBP, printer.

Physical Properties

  • Weight: 12 lbs; 5.4 kg.
  • Size: 12” (H) x 14.5” (W) x 11.5” (D);
  • 30.5 cm (H) x 36.8 cm (W) x 29.2 cm (D)

Power Requirements

  • Voltage: 100 to 240 VAC; 50/60 Hz.
  • Power Consumption: 35 W, typical.
  • Battery: 1 sealed lead acid.
  • Battery Life: 2 hours, typical (3 hours, typical for base unit).
  • Recharge Time: 4 to 6 hours, typical.

Classification

  • Medical Device: Class II Equipment (IIb EU).
  • Electrical Protection: Class I Equipment.
  • Degree of Protection: Type CF, Defibrillator-proof.
  • Protection Against Ingress: IPX1.
  • Safety: EN 60601-1.
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru

POET IQ2 8500Q

POET IQ2 8500Q

A powerful monitoring tool - proprietary state-of-the-art digital 5-agent gas analysis technology. Versatile, reliable and incredibly compact. Designed for anesthesia applications in hospitals and outpatient surgery centers.

Features

  • State-of-the-art non-dispersive infrared (NDIR) technology identifies and measures five anesthetic agent gases: Halothane, Enflurane, Isoflurane, Desflurane and Sevoflurane.
  • Breath-by-breath O2, CO2, and N2O monitoring.
  • Automatic or manual modes.
  • Gas flow sampled at 100, 150 and 200 ml/min.
  • Measurement accuracy is not affected by alcohol or ketones.
  • Fast warm-up time ensures full accuracy within minutes.
  • Auto-calibration.
  • Bright, real-time display of waveforms and numerical values provides instant notification of changing patient status.
  • Lightweight, portable design provides flexible workspace options.
  • The Poet ® IQ2 anesthetic gas monitor is a compact stand-alone monitor that provides leading edge anesthesia gas monitoring. The systems reliable performance, ease of use, flexible design and affordable cost makes it the ideal monitoring solution for anesthesia applications in hospitals and surgical centers.
  • The Poet ® IQ2 automatically identifies and quantifies inspired and expired O2, CO2, N2O, and five anesthetic agents. The system is compatible with color VGA displays and has large screen output capability.
  • Gas Monitoring
  • Method: Sidestream;
  • Non-dispersive infrared (NDIR)
  • Identified Gases: Halothane, Enflurane, Isoflurane,
  • Desflurane, Sevoflurane, O2, CO2, N2O
  • Concentration Units: Vol%, Torr, kPa, mmHg
  • Flow Rates: 100, 150 or 200 ml/min
  • Agent Detection
  • Measurement Range: Halothane: 0 to 10%
  • Enflurane: 0 to 10%
  • Isoflurane: 0 to 10%
  • Desflurane: 0 to 20%
  • Sevoflurane: 0 to 10%
  • CO2: 0 to 12.5%
  • N2O: 0 to 99%
  • O2: 0 to 100%

 

  • Voltage: 100, 120, 220, 240 VAC; 50/60 Hz;
  • Power Consumption: 40W typical;
  • Battery: NiMH;
  • Life: 1 hr typical;
  • Recharge Time 3 hrs typical;
  • Mechanical;
  • Weight: 5.9 kg;
  • Size:
    • 6.5 in (H) x 11.0 in (W) x 12.0 in (D)
    • 16.5 cm (H) x 27.9 cm (W) x 30.5 cm (D)
You can request additional information about the equipment, as well as find out the cost and place an order by writing to us at info@westmedgroup.ru
Contact Us

Write answer 2 + 2 =

By clicking the "Send request" button, you consent to the processing of your personal data. Privacy Policy
Thansk!

Your message has been sent.

We will contact You.